Point Code Converter

Ok guys, this time i want to share with u point code converter application, with this application u can convert the code easily. if u don't really understand what point code is maybe u should read this article:

             An SS7 point code is similar to an IP address in an IP network. It is a unique address for a node (Signaling Point, or SP), used in MTP layer 3 to identify the destination of a message signal unit (MSU).

             In such a message you will find an OPC (Originating Point Code) and a DPC (Destination Point Code); sometimes documents also refer to it as a signaling point code. Depending on the network, a point code can be 24 bits (North America, China), 16 bits (Japan), or 14 bits (ITU standard, International SS7 network and most countries) in length.

             ANSI point codes use 24 bits, mostly in 8-8-8 format.ITU point codes use 14 bits and are written in 3-8-3 format.

            Fourteen bit point codes can be written in a number of formats. The most common formats are decimal number, hexadecimal number, or 3-8-3 format (3 most significant bits, 8 middle bits, 3 least significant bits).Twenty-four bit point codes are written in one of decimal, hexadecimal, or 8-8-8 format.

source: http://en.wikipedia.org/wiki/Point_code

if u want to get this application u can visit at this site :

http://logmett.com/index.php?/products/point-code-converter.html

it provides the application for free.

Hope this can be useful for u =)